How Do I Clean My Sd Card

Posted on by admin

Try cleaning the gold contacts on the card with either a Q-Tip moistened with IPA (Isopropyl Alcohol) +90% or if you don't have any of that on hand, an ordinary pencil eraser will suffice. Do not rub too hard, just enough to ensure that the contacts are clean and bright. Check if the card is detected when you insert it into a device. Let’s start with some basics and use an analogy. Imagine your memory card is a book. A real simple book with only a table of contents and the pages. Maybe it’s 50 pages of Table Of Contents (TOC) and another 450 of actual story, so 500 pages in all. Method 1: Erase SD Card by Fully Formatting SD Card. Formatting can erase SD Card easily, this is one of the most common ways to clean any sort of storage devices. Let’s have a look how to clear an SD card by formatting. Open your computer and start the “File Explorer”. After that, locate the SD Card and make a right-click.

There are various reasons why your SD card showing the wrong size. It might due to technical errors such as bad sectors, virus attacks or even corrupted partitions on your SD card or USB drive. Another reason can be due to a faulty SD card.

Many users have reported that the SD card or a USB drive does not have the same storage space as they claimed. Which is not so familiar in popular brands such as SanDisk or Transcend but most common in cheap brands. So, if this is the case it just means you have brought the wrong SD card. Following are the most common reasons why your SD card is not up to full capacity.

Why is my SD card not showing full capacity?

“Why does my 128gb flash drive only showing 32GB?”

Clean Sd Card Windows

Typically, this error is prevalent in large capacity flash drives such as SDHC or SDXC cards where the capacity of SD card can even reach over 250 GB. So, if the either card reader or the host device does not support such high capacities, the host device will create a smaller partition.

Simply, if a camera or a phone might support a storage drive only up to 32 GB. If you insert such high capacity SD card which is 128 GB on to such a host device, by default, the host device (camera or Phone) will create a partition of 32 GB and the remaining space will be marked as unallocated.

In such cases, your SD card or any kind of flash drive will reduce the storage space.

The other scenarios might be such as Bad Sectors. Bad Sectors are damaged storage sectors that don’t respond to read or write commands. Or a typical virus attack might alter the Master boot record of the flash drive (MBR is like an index of the storage drive where all the details of the drive are maintained) and result in memory card capacity reduced.

Backup or Recover Data from SD Card

To avoid unnecessary data loss problems when the SD card showing the wrong size of its capacity, it is suggested to restore whatever files are available on the card in the very first place.

When it comes to SD card recovery, you can directly copy them and save them to other secure storage devices accessible to Windows PC. But what if the card is inaccessible? Well, under such instances, the perfect choice would be to let the best SD card recovery software for help.

Remo Photo Recovery Software can simply help find and restore files from SD card to other devices with simple clicks on Windows 10/8/7 PC. Simply download, install and follow the simple on-screen instructions to get your data saved from SD card. Remo supports all sorts of data even it recovers videos from a formatted SD card.

Additionally, Remo has a dedicated variation that assists users to recover photos from SD cards on both Windows and Mac. Now, you can move further to reclaim your SD card capacity.

How Do I Clear My Sd Card On My Computer

How do I restore my micro SD card to full capacity?

Once getting all saved data and files from the SD card which shows the wrong size on PC, you can now format SD card to reclaim its full capacity for saving data again. So here you’ll find the two most recommended free methods to format and restore SD card to full capacity.

Use DiskPart cmd command to restore SD card to full capacity

Let’s see how to use DiskPart command to clear and restore capacity on SD card now:

Contacts
  • First of all, get your SD card attached to PC
  • Right-click Start and select Command Prompt (Admin)
  • Sign in as administrator and type: diskpart to bring up DiskPart
  • Type: list disk and hit Enter
  • Type: select disk 1(replace 1 with the disk number of your SD card and hit Enter
  • Type: attribute disk clear read-only and hit Enter
  • Type: exit and hit Enter

Here, one thing to be noticed is that DiskPart CMD command indeed will help you clean the whole SD card, but you do need to recreate a new partition to make the SD card available for saving files again. So, you can use Disk Management tool in Windows 10 or other Windows PC to create a new partition. Be careful, while recreating a new partition in SD card. Even a small ignorance can lead to a corruption of partition map of the SD card that in turn results in severe data loss. If in case, the SD card partition map is corrupted, and not able to create new partition or modify a partition map SD card, check it out here to fix couldn't modify a partition map SD card with utmost ease.

Use Disk Management tool to format and restore SD card to full capacity

In order to fully format and reclaim full capacity of SD card, follow steps:

  • Right-click This PC/My Computer > Manage
  • Select Disk Management under Device Manager, find and right-click on SD card and select Format Volume
  • Rename and reset file system of SD card to NTFS or FAT32 as your need, follow the on-screen guidelines to complete the format process

However, you may selectively follow any one method to get your SD card back to work normally again. Even though you’ll regain full capacity of your SD card and you can use it for storing and saving files and data again then, the above-mentioned methods would cause data loss if you haven’t backed up your files. You may lose your important files due to SD card format!

How Do I Clean My Sd CardHow Do I Clean My Sd CardHow

“If you are a victim of such kind of situation and looking to recover formatted SD card data, then it is recommended you to use Remo Photo Recovery Software. This is a compact flash data recovery software that can efficiently get back photos and data from your SD card. ”

Isn’t it frustrating when your camera gets sluggish after you put the memory card back in? Or when you connect the card to a Windows computer after your Mac, and have to browse through odd-looking files like Spotlight-V100?

Both of these problems are caused by the service files OS X writes onto your memory card when you work with it on a Mac. Normally, when you ask someone how to clean an SD card, the answer you get is “just format it”. But what if formatting the SD card is not an option, because you only want those junk files gone, not everything you’ve got there? Well, looks like you’re going to need an SD card cleaner (we recommend CleanMyDrive 2, it’s free and works with all kinds of external drives).

In this post, we’ll show you how to clear SD card junk with a cleaner app, so that you don’t have to format your SD card. But first, let’s figure out what these troublemaker files on your card are.

What’s there to clean on an SD card?

How Do I Clean My Sd Card

After connecting your card to a Mac, you may have noticed some of these files on it:

How Do I Clean My Sd Card

  • .DS_Store
  • .Spotlight-V100
  • .TemporaryItems
  • .fseventsd

What are they? These are files the OS X creates as it works with your SD card, for various purposes. .DS_Store, for example, stores different folder data for the Finder, like how the icons are positioned. .fseventsd is a log file the system writes when files are deleted or modified. So, at some point they were useful to your Mac, but not anymore — and they are certainly useless to you. Even worse: they can corrupt your memory card’s performance and cause your camera to lag.

But the most annoying thing about these files is that they are hard to get rid of manually. Formatting the SD card helps, but if you don’t want to throw out the baby with the bathwater and delete your own files along with the junk — an SD cleaner app is the way out.

How to remove junk files with an SD card cleaner

External storage cleaner apps for Mac are not as common as they should be (someone please do something about that). But fortunately, we’ve got a free app that is tremendously helpful for SD cards and other types of external drives — CleanMyDrive 2. Here’s how you clean all the pesky junk files with it:

  1. Install CleanMyDrive 2 (it will settle in your menu bar for easy access).
  2. Click on the CleanMyDrive 2 icon in your menu bar. You’ll see all connected drives, including your SD card.
  3. Hit the Clean button next to your card.

How To Clean My Sd Card Android

Done. This will clear SD card junk and make the card run like new again. Even better: you can set the SD cleaner to remove junk automatically upon eject. To set up automatic cleanups, do the following:

How To Clean My Sd Card

  1. Open CleanMyDrive 2.
  2. Click on the little round icon next to your SD card.
  3. Enable Automatic cleanup.

That’s it. From now on, CleanMyDrive 2 will wipe out OS X service files every time you eject the SD card. You can forget about annoying .DS_Stores on your memory card, or the laggy camera after you’ve transferred pics onto your Mac. Get CleanMyDrive 2 for free and see how much an SD card cleaner can help. Seriously, it’s more useful that we’re telling you.